供应FTS天棚帘

FTS 系列

适用与水平、垂直、倾斜或弯曲的玻璃天幕顶。它具有面料张力强、遮阳面积大、操作灵活等特点，国内外***大工程应用甚多。这一系统采用两个法国SOMFY FTS专项使用电机，电子控制以调节面料的张力。在机构停止时，静态张力会使面料收紧绷直，更贴近建筑结构。

组成和安装：由两个马达和一个电子控制盒组成，可开可关，并可停在任意中间位置。当机构停下来时，FTS系统容许在任何位置达到预设。

FTS canopy system: it is applicable to horizontal, vertical, leaned or curved canopy roof. It has many characteristics such as fabric-strong, big shade areas, flexible operation and so on, and it is widely adopted by domestic and foreign famous giant projects. The system adopts two SOMFY motors and electrical controls to regulate the fabric tension. When the system stopped, the static tension will tighten and stretch the shell fabric, making it to press closer to the building structure.

Composition and installation: it is comprised of two motors and an electrical control box with ON/OFF switches, and it can stay at any position in the interspaces. When the system stops, the FTS system is capable of reaching the default at any position.

1.安装脚A Bracket A

2.FTS电机 Motor

3.皇冠轮 Crown wheel

4.驱动轮 Driving wheel

5.卷管 Roller pipe

6.卡簧Snap rings

7.轴承Bearing

8.尾塞轮Idler wheel

9.轴Axes

10.安装脚B Bracket B

11.遮阳面料 Fabric

12.牵引杆 Traction Rail

13.钢丝拉攀 Traction steel wire

14.钢丝 Steel wire

15.卷绳器 Coiler

使用范围

弯曲、倾斜或水平的玻璃大幕顶。

Application Scope:

Arc-shaped、lean or horizontal glazed structures.

性 能

可停留在中间任意位置，有多种控制方式可供选择。

Character:

The system can be stopped at any position of middle.

技术要求

每幅宽度0.8-2.5 m，长度≤12 m，面积≤48m2较为适宜。

Technical Requirment:

Width ≤0.8-2.5 m, Length≤12m.,Area≤48m2

电 机

采用FTS专项使用管状电机，根据宽度和面积选用不同型号的电机。

Motor:

AC Tubular motor.

控 制

可以手控、红外遥控、无线电遥控、单独控制、集群控制。

Control System:

Manual, Remote control, Switch,Infrared remote-control,Single control,Group control.

说 明

采用一拖二或一拖三方式时需加平衡器；当采用弧形机构时，中间需加导布杆，FTS天棚帘机构对安装结构要求很高。

Remarks:

It is needed balancer when one motor control two or three FTS;It is needed traction rail when the structure is

arc-shaped.

梯形天棚帘Trapezoid-shaped FTS

一拖二天棚帘One motor control two FTS.