供应塑料薄膜电气强度试验仪

塑料薄膜电气强度试验仪BDJC-100KV

塑料薄膜电气强度试验仪满足标准：
Meet the standard:
GB/T 1408-2006 绝缘材料电气强度试验方法
Test methods for electrical strength of 1408-2006 GB/T insulating materials
GB/T1695-2005 硫化橡胶工频电压击穿强度和耐电压强度试验
Test of power frequency voltage breakdown strength and voltage endurance of GB/T1695-2005 vulcanized rubber
GB/T3333 电缆纸工频电压击穿试验方法
Test method for power frequency voltage breakdown of GB/T3333 cable paper
HG/T 3330绝缘漆漆膜击穿强度测定法
Determination of breakdown strength of HG/T 3330 insulating paint film
GB12656 电容器纸工频电压击穿试验方法
Test method for power frequency voltage breakdown of GB12656 capacitor paper
ASTM D149 固体电绝缘材料在工业电源频率下的介电击穿电压和介电强度的试验方法.
Standard Test Method for dielectric breakdown voltage and dielectric strength of D149 ASTM solid electrical insulating materials at industrial power frequencies.
电气强度能够自动判别试样击穿并采集击穿电压数据及泄露电流，同时能够在击穿的瞬间电压迅速降低自动归零。软件系统操作方便，性能稳定，安全可靠。
The electric strength can automatically determine the sample breakdown and collect the breakdown voltage data and leakage current, and can quickly reduce the automatic return to zero at the same time. Software system is easy to operate, stable performance, safe and reliable.

塑料薄膜电气强度试验仪特点:
Characteristic
1、运行于WIN XP/WIN7/WIN8系统下的单独安装软件，界面友好，操作简单
1, running in the XP/WIN7/WIN8 WIN system under the independent installation software, friendly interface, easy to operate
2、实验显示曲线，数据自动储存，自动查找
2, the experiment shows the curve, the data automatic storage, automatic search
3、多种用途可以进行交、直流试验试验准确、可靠、安全
3, a variety of uses can be carried out, DC test test is accurate, reliable and safe
4、计算机控制试验过程，自动判断停止，自动复位
4, computer control test process, automatic judgment stop, automatic reset
5、超压、过流、短路、漏电、误操作等多种保护
5, over voltage, over current, short circuit, leakage, wrong operation and other protection

塑料薄膜电气强度试验仪主要技术指标：
Main technical index:
1、输入电压 AC220V 50Hz
1, input voltage 50Hz AC220V
2、输出电压： AC：0～150kV； DC：0～150kV
2, output voltage: AC:0 ~ 150kV; DC:0 ~ 150kV
3、输出功率： 15kVA
3, output power: 15kVA
4、测量范围： AC15～150kV； DC15～150kV
4, measuring range: AC15 ~ 150kV; DC15 ~ 150kV
5、测量误差： ≤ 2％
5, the measurement error is less than 2%.
6、升压速率： 1kV/s～5kV/s
6, boost rate: 1kV/s ~ 5kV/s
7、耐压时间： 0～4H
7, pressure time: 0 ~ 4H
8、漏电流 ： 1～30 mA可由计算机软件自由进行设定
8, leakage current: 1 ~ 30 mA can be set by the computer software free
9、电源 ： 交流220V±10%的单相交流电压和50Hz±1%的频率
9, power: AC 220V 10% of the single-phase AC voltage and the frequency of 50Hz 1%

塑料薄膜电气强度试验仪结构原理及性能特点：
Structure principle and performance characteristics:
1、主要由：升压系统(高压变压器)、测量系统、A/D转换器、放电系统、电较、油箱、电较定位架、计算机数据处理系统、软件等组成；
1, mainly by: boost system (high voltage transformer), measurement system, A/D converter, discharge system, electrode, fuel tank, electrode positioning frame, computer data processing system, software and so on;
2、计算机---A/D转换器---测量控制系统---调压装置----升压变压器-----试样；
2, the computer ---A/D converter --- measuring control system --- voltage regulator -- the test sample;
3、高压变压器主要产生试样所需的直流电压；
3, high voltage transformers are mainly generated by the DC voltage of the sample;
4、调压器用于调节升压变压器输入端电压以产生高压所需的输入电压；
4, the regulator is used to adjust the input voltage of the boost transformer to generate the required input voltage;
5、电压测量主要是从高压变压器测量端测量，高压变压器测量端和高压端是线性的；
5, voltage measurement is mainly from the measurement of high voltage transformer measurement, high voltage transformer measurement and high pressure side is linear;
6、放电系统在试验做完以后自动放电，以免产生放电对人身的危害；
6, the discharge system in the test after the automatic discharge, so as to avoid the harm to the human body;

塑料薄膜电气强度试验仪计算机系统及软件包
Computer systems and software packages
1、试验软件是我公司较新研发的功能强大、操作简单、显示直观的试验软件系统。
1, the test software is my companys latest research and development of powerful, easy to operate, display intuitive test software system.
2、采用计算机控制通过人机对话方式，完成对绝缘介质工频电压击穿，工频耐压试验。
2, the use of computer control through the man-machine dialogue, the completion of the insulation dielectric power frequency voltage breakdown, power frequency withstand voltage test.
3、试验过程中可动态绘制出试验曲线，试验的曲线可以多种颜色叠加对比，局部放大，曲线上任意一段可进行区域放大分析；
3, the test process can be dynamically drawn out of the test curve, the curve can be a variety of color overlay contrast, local amplification, curve on any section of the region can be amplified analysis;
4、可对试验数据进行编辑修改，灵活适用；
4, the test data can be edited and modified, flexible;
5、试验条件及测试结果等数据可自动存储；
5, test conditions and test results and other data can be stored automatically;
6、试验报告格式灵活可变，适用于不同用户的不同需求；
6, test report format flexible, applicable to different needs of different users;
7、可对一组试验中曲线数据的有效与否进行人为选定；
7, can be used for a group of test data in the curve of the effective or not artificially selected;
8、试验结果数据可导入EXECL,WORD文档编辑；
8, the results of the test data can be imported into WORD, EXECL document editing;
9、软件设备人员管理功能，试验人员可设置自己的试验项目和试验参数，设置自己的试验内容后别人无法进入程序；
9, software equipment personnel management function, test personnel can set up their own test items and test parameters, set up their own test content after others can not enter the program;
10、过电流保护装置有足够的灵敏度，能够保证试样击穿时在0.1S内切断电源；
10, over current protection device with sufficient sensitivity, to ensure that the sample breakdown in the 0.1S cut off the power supply;
11、仪器运行的好性: 仪器可连续运行使用，不需为保护仪器而定期停机。
11, the persistence of the operation of the instrument: the instrument can be used continuously, without the need for the protection of equipment and regular downtime.

塑料薄膜电气强度试验仪使用时的注意事项：
Note for use:
本仪器为高压试验设备，使用时必须注意以下几点
This instrument is a high voltage test equipment, the use must pay attention to the following points
1、试验过程中不能让无关人员靠近，因本试验仪器可产生较高的电压，未经过培训的人员不能使用该设备。试验时要有监护人员，不要单人使用。以防万一发生意外情况。
1, the test process can not let the irrelevant personnel close, because the test instrument can produce a higher voltage, not through the training of personnel can not use the device. When testing, there should be a guardian, not a single use. In case of accident.
2、长时间不使用设备，在再使用时，先让仪器空载加压一次，即把高压电较的接线从均压球上取下。查看计算机试验界面，看看高压电压是否正常。
2, for a long time without the use of equipment, in the re-use, the first time to let the instrument pressure once, that is, the high-voltage electrode wiring from the uniform pressure on the ball to take off. View the computer test interface, to see if the normal voltage is normal.
3、试验中发生意外情况要及时切断电源，问题处理后才能继续试验。
3, the accident occurred in a timely manner to cut off the power supply, the problem can continue to test after treatment.
4、设备安放要平稳，安放的地面要坚固。较好是水泥地面以免产生共振。
4, the equipment should be placed on the ground to be stable. It is better to cement the ground so as to avoid resonance.
5、该设备在使用中外壳要接保护地线，既设备外壳接大地,以保护操作人员和设备运行的安全。
5, the equipment in the use of the shell to be connected to the protection of the ground, both equipment enclosure to the earth, in order to protect the operation of personnel and equipment safety.
6、使用完设备后，要关掉系统各部分电源，不准带电插拔电源线。
6, after the use of the device, to turn off the power supply of the system, are not allowed to plug the power line.
7、要按规定的电源电压接入设备。确保电路接线正确。否则会损坏设备。
7, according to the provisions of the power supply voltage access equipment. Make sure the circuit connection is correct. Otherwise it will damage the device.
8、该仪器需安置在室内，实验室应整洁、干燥、无腐蚀性介质，非相关人员不要随意操作。
8, the instrument should be placed in the room, the laboratory should be clean, dry, non corrosive media, non related personnel do not operate at random.
9、不要让设备电缆碰到尖边，以免划破电缆绝缘；不要让电缆压在重物之下，以免压断电缆引起火灾；不要用电缆拉物体或用电缆捆绑物体，以免拉断电缆使设备不能正常运转。
9, dont let cable equipment encountered sharp edges, so as not to cut the cable insulation; dont let cable in under heavy pressure, to avoid pressure broken cable caused by fire; dont cable pull objects or objects tied with a cable, so as not to pull off the cable so that the device is not functioning properly.
10、不要让设备碰到水溅，腐蚀性气体，可燃气体和可燃物。如果不避免，可能火灾。
10, do not let the equipment encountered water splashing, corrosive gases, flammable gases and fuel. If you dont avoid it, it may be a fire.
11、搬动设备时,要切断设备电源,既要把插头从插座中拔下。禁止搬动设备时放倒设备或倾斜45°角以上。
11, mobile devices, to cut off the power supply equipment, is to unplug the plug from the socket. No equipment or equipment moving down tilt angle of 45 degrees or above.
12、不要在设备运行时插拔设备的电源插头。
12. Do not plug the power plug of the device when the device is running.

主营产品：

电压击穿试验仪，体积表面电阻率测试仪，介电常数介质损耗测试仪