DZ47 MV MN

MN欠压脱扣器、MV过压脱扣器、MN MV过欠压脱扣器

一、适用范围

本系列断路器电气附件是我公司专为(DZ47)-63、(DZ47)-100系列断路器配套设计的辅助功能元件，在电气等线路或家居、建筑中，可以根据需要选择不同的电气附件与(DZ47)-63、(DZ47)-100系列断路器配合，以实现断路器线路的欠压、过压、过欠压保护等功能。

二、附件的名称、用途及符合标准

(DZ47)-63、(DZ47)-100系列断路器附件的名称、用途及符合标准见表1。

附件名称

代 号

用 途

符合标准

欠压脱扣器

(MN)

当电源电压下降在（0.35～0.75）Ue之间时，使断路器脱扣，实现线路的欠电压保护。

IEC60947-2：1999、GB14048.2-2001

过压脱扣器

(MV)

当电源电压上升到270±5%时，使断路器脱扣，实现线路的过电压保护。

IEC60947-2：1999、GB14048.2-2001

过、欠压脱扣器

(MN MV)

当220V额定电源电压上升到270±5%或下降在170±7V时，使断路器脱扣，实现线路保护。

IEC60947-2：1999、GB14048.2-2001

三、主要技术参数过压、欠压、过欠压脱扣器，欠压保护器技术参数（见表2）

附件名称

额定工作电压Ue

动作电压

过压脱扣器

AC：Un=230V（过压）

270 V±5%

欠压脱扣器

AC：Un=230V（欠压）

170 V±5%

过、欠压脱扣器

AC：Un=230V（过、欠压）

过压：2705±5%V 欠压：170±7V

安装方式所有电气附件都加挂在断路器的侧面

注：在断路器左侧拼接的附件可以多个，在断路器右侧拼接的附件只能1个件与安装条件环境温度：-5℃～ 40℃；海拔高度：不超过2000m；环境条件：应无会引起爆开危险的介质，也无会腐蚀和破坏绝缘的有害气体和导电尘埃；安装条件：采用35mm标准卡轨安装。

MN undervoltage tripping device, MV overvoltage tripping device, MN MV undervoltage tripper

One, applicable scope

The series circuit breaker electrical accessories are specially designed for the ( DZ47 ) -63, ( DZ47 ) -100 series circuit breaker supporting design of auxiliary function element, in the electrical circuit or home furnishing, buildings, can be chosen according to the different needs of the electrical accessories and ( DZ47 ) -63, ( DZ47 ) -100 series circuit breaker with, to circuit breaker circuit, overvoltage, undervoltage overvoltage and undervoltage protection function.

In two, the name of the attachment, use and standard of

( DZ47 ) -63, ( DZ47 ) -100 series circuit breaker accessories name, purpose and standard of table 1.

Attachment name code uses standard

Undervoltage tripping device ( MN ) when the supply voltage drops in ( 0.35 ~ 0.75 ) Ue between, make the circuit breaker tripping, realizes line undervoltage protection. IEC60947-2:1999, GB14048.2-2001

Overvoltage tripping device ( MV ) when the supply voltage is increased to 270±5%, make the circuit breaker tripping, realize line overvoltage protection. IEC60947-2:1999, GB14048.2-2001

Too, undervoltage tripping device ( MN MV ) when 220V rated supply voltage rises to 270± 5% or 170±7V, drop in, the circuit breaker tripping, realization of line protection. IEC60947-2:1999, GB14048.2-2001

In three, the main technical parameters of overvoltage, under voltage, overvoltage and undervoltage tripper, under-voltage protection device technical parameters ( see Table 2 )

Attachment of rated voltage Ue operation voltage

Overvoltage tripping device AC:Un=230V ( OV) 270 V± 5%

Undervoltage tripping device AC:Un=230V ( 170 V ± 5% under-voltage )

Too, undervoltage tripping device AC:Un=230V (, undervoltage overvoltage ): 2705 ± 5%V under pressure: 170 ± 7V

Install all electrical accessories are coupled on the side of circuit breaker

Note: in circuit breaker left splicing attachment can be more than one, in the right of breaker splicing attachment of only 1 and the mounting conditions of the environment temperature: -5 ℃~ 40 ℃; altitude: not more than 2000m; environmental conditions : there should be no cause explosive medium, nor can corrupt and broken insulation harmful gas and electric dust; installation conditions: using the standard 35mm card track installation.