BW橡胶止水带厂家成批出售

橡胶止水带和止水橡皮系以天然橡胶与各种合成橡胶为主要原料，掺加各种助剂及填充料，经塑炼、混炼、压制成型,其品种规格较多，有桥型、山型、P型、U型、Z型、乙型、T型、H型、E型、Q型等。根据使用情况又可分类为埋式橡胶止水带和背贴式橡胶止水带。该止水材料具有良好的弹性,耐磨性、耐老化性和抗撕裂性能,适应变形能力强、防水性能好，温度使用范围为-45℃- 60℃.当温度超过70℃，以及橡胶止水带受强烈的氧化作用或受油类等农业生产体系溶剂侵蚀时，均不得使用橡胶止水带。
The rubber sealing strip and sealing rubber, natural rubber and various synthetic rubber as the main raw material, and the filling material mixed with various additives, through plasticizing, mixing, molding, the more varieties of different specifications, bridge, mountain type, P type, U type, Z type, T type, H type, type, E type and Q type etc.. According to the use, it can be classified as buried rubber stop belt and back sticking rubber water stop belt. The sealing material has good elasticity, abrasion resistance, aging resistance and tear resistance to deformation ability, good waterproof performance, temperature range of -45 DEG - 60 DEG. When the temperature exceeds 70 degrees Celsius, and the rubber sealing strip by strong oxidation or by oil and other organic solvent erosion, shall the use of rubber sealing strip.
止水带的设计及选用应根据构筑物的重要性等级、变形缝变形量及水压、止水带的使（应）用工作环境、经济因素等条件综合考虑确定。
The design and selection of water stop belt should be based on the importance grade of the structure, the amount of deformation joint deformation and water pressure, the working environment and economic factors of the water stop belt.
止水带材质的选择可按照下列规定：
The choice of material for water stop strip can be made according to the following regulations:
1、一般情况下多选择天然橡胶止水带；
1, in general circumstances, choose natural rubber water stop belt;
2、遇有弱酸、碱类腐蚀介质时，宜选用氯丁橡胶止水带；
2, when there is weak acid, alkali corrosion medium, it is better to use neoprene waterproof belt;
3、遇有油类介质时宜选用橡胶止水带；
3, in case of oil medium should choose rubber water stop belt;
4、遇有霉菌侵蚀的可能时，应考虑止水带的防霉性，其等级应达到2级及2级以上；
4, when there is the possibility of mold erosion, the mildew resistance of water stop belt should be considered, and its grade should be above 2 and above 2;
5、当使用温度为：-25℃~60℃时选用氯丁橡胶止水带、-35℃~60℃时选用天然橡胶止水带、-40℃~60℃时选用三元乙丙橡胶止水带；
5, when use temperature is: -25 degrees ~60 degrees, choose chloroprene rubber water stop, -35 degrees ~60 degrees, choose natural rubber water stop, -40 degrees ~60 DEG C, choose three yuan EPDM rubber water stop belt;
6、当遇有应与防水板等材料焊接时，宜选用与其同分子的合成树脂型止水带（EVA、PE、ECB、HDPE、PVC）。
6, when meeting with the waterproof board and other materials welding, it is better to choose the same kind of molecular synthetic resin sealing tape (EVA, PE, ECB, HDPE, PVC).