LED灯管应急电源10-30W足功率驱动CE ROHS认证

LED灯管应急电源10-30W足功率驱动CE ROHS认证

保护特性

Protective properties

过压保护：＞120V

-Over voltage protection：＞120V

保护方式：出现异常关闭输出，异常移除后重启恢复

-Protection mode: close the output and restart the recovery after the exception is removed

空载保护

-No-load protection

保护方式：无负载时立即切断输出，接上负载恢复正常保护

Protection mode: When there is no load, immediately cut off the output, connect the load to restore normal protection

电池过放保护

-Battery overdischarge protection

保护方式：当电池电压放至9V状态时，电池将自动截止放电，通电后将自动充电，直至充满

Protection mode: When the battery voltage is put to 9V state, the battery will automatically cut off the discharge, after power on, it will automatically charge until it is fully charged

电池过充保护

-Battery overcharge protection

电池充至12.6V时将自动截止充电

When the battery is charged to12.6V, it will automatically stop charging

安全性能

Security features

抗震性：-抗振性：10?500Hz，2G 10min./1周期，60分钟长，每个轴

-Vibration resistance：10 ~ 500Hz, 2G 10min./1 cycle, 60 min long, each axis

耐压性：输入与输出之间：1.5KVAC 输入与接地：1.5KVAC 输出与接地：0.5KVAC

-Pressure resistance：Between input and output: 1.5KVAC input and ground: 1.5KVAC output and ground: 0.5KVAC

绝缘电阻：输入与输出之间：输入与接地之间-输出与接地之间：100M Ohms / 500VDC

-Insulation resistance：Between input and output: input and ground: output and ground: 100M Ohms/500VDC

纹波噪声：400mvp-p

-Ripple noise：400mvp-p

冲击电流：冷启动10A230VAC

-Impact of current：Cold start 10A230VAC

漏电流：＜3.5Ma / 240VAC

-Leakage current：＜3.5Ma/240VAC